| CR®
Series Corrosion Resistant Air Cylinders Models Single Acting & Double Acting
Mounts
Bore Sizes |
Click here
to request this catalog |
* Reg. US Pat. Office for DuPont's acetal resin. For detailed information, a DuPont Delrin Handbook is available. For direct answers regarding Delrin properties, call DuPont's toll free number (800) 441-7515.
- STAINLESS STEEL BODY:
Type 304 Stainless Steel manufactured to special mill specifications and tolerances to insure a long cylinder life.
- STAINLESS STEEL ROD:
Ground & Polished Type 303 Stainless Steel rods are standard on the Stainless Steel Series. All rods have wrench flats and stress relief grooves.
- PISTON ROD ASSEMBLY:
Piston Rods are threaded, anaerobically sealed, and machine staked into the piston for triple protection.
- END CAPS, ROD GUIDE, PISTON & REAR HEAD:
Delrin * acetal resin developed by DuPont is a crystalline thermoplastic co-polymer made by the polymerization of formaldehyde.
- SPRINGS:
Springs for spring action cylinders are made from stainless steel and designed for millions of cycles. Special spring forces are available upon request.
- BUNA-N U-CUP ROD & PISTON SEALS:
U-Cup seals provide low breakaway friction and maximize cylinder life expectancy. Standard Buna-N seals are recommended for operating temperatures of -20oF (-25oC) to 200oF (95oC). Fluoroelastomer & FDA approved seals are available for chemical compatibility and/or food processing applications.
- ROD SEAL:
Precision machined rod seal groove provides a smooth sealing surface while positively retaining the seal without requiring additional components and relying on press fit containment.
- WEIGHT:
Piston, front, and rear caps made of Delrin * produces a light weight cylinder.
- DESIGN:
CR® air cylinders are designed to withstand exposure to a wide range of moisture, lubricants and solvents.
- TEMPERATURE:
Ambient temperature recommended 40oF to 160oF.
- ACCESSORIES:
All accessories, rod clevises, foot brackets and pivot brackets are of stainless steel material.
![]() |